Skip to content
Set your watch
We will see here how you can adjust your watch to your liking.
Accessories
When you buy a watch directly from us, a tuning kit is delivered to you with the watch. This will allow you to adjust your watch yourself to adapt it to your wrist.
What the Kit includes:
This includes a punch, as well as a wooden piece accommodating a perforation that will allow you to take out the spring clips that hold the links of your watch.
6 steps to follow:
Step 1 :
Place one of the links of your watch strap on the wooden piece so that the spring clip of the link can come out into the perforation of the wooden piece.
Step 2:
Using the awl, extract the spring clamp from the mesh by pressing hard or by tapping the end of the awl with a small hammer. Be careful not to damage the wood with the hammer. Protect it if necessary.
Step 3:
Extract the spring clamp from the link. Following this operation, your bracelet should be cut in half, as in the image below.
Step 4:
Once the first 3 steps have been completed, repeat the operation with a mesh that you have chosen with care so that the bracelet adapts to your wrist when you join the two remaining ends.
Step 5:
Once the small segment of mesh has been removed, all you have to do is bring the two ends of the bracelet together. To do this, approach the links at each end of the bracelet so that the holes of the two links are right in front, then insert a spring clip delicately using the awl and the small hammer.
Step 6:
You can now wear your watch. And if you have reduced enough stitches, this one will suit you perfectly.
If you have any problems, do not hesitate to contact us by email at the following address:
contact@fl-watch.com
Are you reassured? Now that you know how to set your watch on your own, nothing is holding you back. Go ahead and choose the watch that's right for you from our wooden watch collections:
